Audix W3310 Combo Wireless Microphone System (Discontinued)
Usually arrives in 5-9 business days.
The Audix W3L5O is a RAD360 Wireless Bodypack System with L5O Lavalier Microphone that isolates speech while minimizing unwanted ambient noise. Simply put, the performance of this system is robust, clear and reliable.
The Audix W3L5O is a RAD360 Wireless System that is frequency agile with 193 selectable frequencies (per system group) and dual tuner, true diversity receivers.
The RAD360 system is designed for a wide range of professional applications including live performances, fixed installations, corporate meetings, education and Houses of Worship. The W3L5O Wireless system features the extremely low profile L5O condenser microphone which is optimized for speech, presentation and theatrical productions.
The L5O is a micro-sized (5mm) omni-directional microphone. The L5 series, which features modular, interchangeable capsules, is intended for use with the RAD360 wireless system as well as hard-wired vocal and instrument applications. Designed to provide the highest quality sound in the smallest possible package, the L5 miniature condenser is ideally suited for broadcast and live sound applications for speech, interview, presentation, theatrical production, and instruments. Known for its clarity, low profile and ease of operation, the L5 has the ability to accurately capture and reproduce vocals from a comfortable distance of 4-8 inches or for close miking acoustic instruments from a distance of 1-2 inches.
The L5O is omni directional, helping to create a free open-air and natural sound with excellent transient response. This microphone has a smooth and accurate frequency range of 20 Hz - 20 kHz and is lightweight and discrete.
General:
L5O Lavalier:
| General | |
|---|---|
| Switchable Frequencies | 193 (per system group of 24 MHz spaced 125 kHz apart) |
| Frequency Response | 40 Hz–18 kHz (depending on capsule) |
| Signal-to-Noise Ratio | >110 dB |
| Compander System | HDX |
| Pilot Tone | 32.768 kHz |
| RAD360 Receiver | |
| Receiving System | Dual tuners, true diversity receiver |
| Image Rejection | 50 dB nominal, 45 dB minimum |
| Signal-to-Noise Ratio | 110 dB @ 30 kHz deviation (IEC-weighted), max modulation 75 kHz |
| Total Harmonic Distortion | 1% (10 kHz deviation at 1 kHz) |
| Sensitivity | 26 dBμV (S/N 60 dB at 5 kHz deviation, IEC-weighted) |
| Intermediate Frequency | 55.875 MHz, 10.7 MHz |
| Audio Output (AF Level set at “0”) | Unbalanced: 40 mV (at 1 kHz, 10kHz deviation, 10k ohm load) Balanced: 8mV (at 1 kHz, 10kHz deviation, 600 ohm load) |
| Output Connectors | Unbalanced: 1/4” phone jack Balanced: XLR |
| Nominal Peak Deviation | Balanced: -24 to +18dBu Unbalanced: -30 to +12dBu (adjustable in 6 dB-steps) |
| Adjacent Channel Rejection | >68 dB |
| Intermodulation Spacing | >68 dB |
| Image Rejection | >72 dB |
| Power Supply | 120V AC 60 Hz; 12-18V DC, 350 mA, with external supply |
| Dimensions (H x W x D) | 1.1" (38 mm) x 8.35" (212 mm) x 6.5" (165 mm) |
| Weight | 2.32 lbs (1.05 kg) |
| B360 Bodypack | |
| RF Power Output | 50 mW Max |
| Spurious Emissions | Under federal regulations |
| Input Connector | 3 pin mini-XLR |
| Input Controls | Mic/line switch, and 20 dB potentiometer |
| Current Consumption | 100 mA typical |
| Input Impedance | Mic: 10k Ohm; Line: 1M Ohm |
| Max Sound Pressure Level | Approx. 128–140 dB (depending on mic) |
| Dimensions (H x W x D) | 4" (104 mm) x 2.8" (71.3 mm) x 1" (27 mm) |
| Weight (with Battery) | 0.450 lbs (0.205 kg) |
| L5O Lavalier Microphone | |
| Transducer Type | Pre-Polarized Condenser |
| Frequency Response | 20 Hz - 20 kHz |
| Polar Pattern | Omnidirectional |
| Output Impedance | 200 Ohms balanced |
| Sensitivity | 8 mV (O) / Pa @ 1k |
| Equivalent Noise Level | |
| Signal-to-Noise Ratio | >63 / 64 dB |
| Power Requirements | 9-48 V Phantom Power |
| Maximum SPL | ≥130 / ≥134 dB |
| Cable / Connector | Shielded 3’ terminating to a miniature 3 pin XLRf connector |
| Polarity | Positive pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 |
| Housing / Finish | Machined Brass / Black Finish |
| Dimensions (H) | 0.91" (23 mm) |
| Weight | 0.029 lbs (0.013 kg) |
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.
Model #:
Usually arrives in 5-9 business days.