Search results for 'mixer'

The QSC MP-MFC controller is an intuitive wall mount control to enable customizable system adjustments for the MP-M Series music and paging mixer. Designers can configure these control peripherals to provide end users with as much or as little control over the system as needed.

The QSC MP-MFC controller is an intuitive wall mount control to enable customizable system adjustments for the MP-M Series music and paging mixer. Designers can configure these control peripherals to provide end users with as much or as little control over the system as needed.

The RDL EZ-MX4ML Microphone and Stereo Line Audio Mixer is a stereo audio mixer with two mic and two line inputs. Microphones connect through balanced XLR jacks that provide phantom voltage. Both line inputs connect through RCA jacks; one also includes a MINI-jack input.

The Atlas Sound AWV2 2RU Wall Mount System Wall Mount System is a cost effective wall mount system which allows low profile mounting of Ethernet switches, Mixer Amplifiers or other rack mount electronics. This bracket style hardware kit offers 2RU mounting configuration and creates flush mounting options for equipment.

The Atlas Sound TSD-MIX31RL 3x1 Mic/Line Mixer includes two mic/balanced line inputs via removable Phoenix style connectors and a stereo summing dual RCA input. Switchable phantom power is provided for both mic inputs to facilitate condenser microphones.

The Atlas Sound TSD-PA252G Two Channel Power Amplifier is a reliable, cost effective 4Ω stereo amplifier well suited for higher power amplification requirements. Output is 25W per channel at 4Ω or 50W bridge mono at 8Ω. Input is via balanced stereo phoenix style and unbalanced RCA connectors.

The JBL CSM 14 Commercial Series mixer delivers unsurpassed quality in commercial sound, designed for everything from schools and hospitals to restaurants and fitness facilities.

The JBL CSM 28 Commercial Series Mixer delivers unsurpassed quality in commercial sound, designed for everything from schools and hospitals to restaurants and fitness facilities.

The Cloud Electronics DCM1e is the new Ethernet version of the popular DCM1 Digital Control Zone Mixer. The addition of an Ethernet port allows the in-built Ethernet web-server to be connected via an RJ-45 cable to any independent or existing wireless router.

The TOA D-921F Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors. Input sensitivity and phantom power setting can be performed at the main frame such as the D-901.

The TOA D-922F Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors. The D-901's 4-pole DIP switch is used to set the input sensitivity, phantom power supply, and ground lifting.

The TOA D-921E Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors. Input sensitivity and phantom power setting can be performed at the main frame such as the D-901.

The Atlas Sound TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante® digital audio. The TSD-DAC2i can be used for any Analog to Dante® digital audio endpoint but is ideally suited to be used with the Atlas Sound WTSD wall mixer series.

The AtlasIED WTSD-MIX41K is a 4x1 Mic/line Analog Mixer that features four balanced microphone/line inputs and balanced line output. Selection between mic or line level is done via dip switch on the rear panel.

The Samson S-zone gives system installers all the features they need to control up to four zones of audio with a compact, single rack space unit.

The Tascam RC-W100-R120 is a wall-mounted controller for the MX-8A Matrix Mixer with DSP. Designed for quick and easy operation in meeting rooms, lecture halls, stores, restaurants, and multipurpose spaces, the wall mount controller incorporates an easy-to-read LCD display, one rotary encoder with a push switch, and four push-button switches.

The TOA D-922E Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors. The D-901's 4-pole DIP switch is used to set the input sensitivity, phantom power supply, and ground lifting.

The Electro-Voice PC boundary microphone is a very low-profile area microphone that can be used on any surface and with virtually any mic mixer. Featuring multiple on-board polar patterns—three directional and one omni—the PC Boundary is ideal for any installation where premium-grade area coverage is required.

The TX-8A is the ideal choice in many applications requiring superior quality transformer coupling between the output of a 4 or 8 Ohm power amplifier and the input of an audio mixer or amplifier. A front-panel LEVEL control allows the output to be adjusted for -10 dBV or +4 dBu over a wide range of amplified power levels.