Search results for 'Williams Sound PPA'

The TOA D-922F Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors. The D-901's 4-pole DIP switch is used to set the input sensitivity, phantom power supply, and ground lifting.

The TOA D-001R Line Input Module is a plug-in module designed for use with the 9000 Series. It has 2-channel unbalanced inputs of RCA jacks. Input signals to both channels are mixed together. The D-001R can process effect for TONE/EQ/COMPRESSOR to two inputs independently.

The TOA D-001T Dual Line Input Module is a plug-in module designed for use with the 9000 Series amplifiers and can provide two independent balanced inputs. The D-001T can handle signals ranging from microphone level to line level by controlling their input sensitivity in 9 increments from -60 dB to -10 dB.

The TOA D-971R Line Output Module is a 4-channel line output module designed for use with the D-901 Digital Mixer, etc. It is equipped with standard RCA pin jacks.

The TOA D-921E Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors. Input sensitivity and phantom power setting can be performed at the main frame such as the D-901.

The TOA D-921F Microphone Line Input Module is a 2-channel microphone/line input module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors. Input sensitivity and phantom power setting can be performed at the main frame such as the D-901.

The TOA D-971E Line Output Module is a 4-channel line output module designed for use with the D-901 Digital Mixer, etc. It is equipped with removable terminal block type connectors.

The TOA D-971M Line Output Module is a 4-channel module designed for use with the D-901 Digital Mixer, etc. It is equipped with XLR connectors.

The NEXO NXAE104 is a network card for NXAMP amplifiers. The NXAE104 receives 4 audio channels in AES/EBU format.

The RDL ST-VCA3 Voltage Controlled Amplifier is used in applications requiring smooth audio level control from a remote control panel, potentiometer or dc voltage (0 to 10 V). Installation in series with the audio input of a power amplifier allows remote control of that amplifier's level.

The RDL DS-HA1A Format-A Stereo Headphone Amplifier is a two pair receiver and audio headphone amplifier compatible with RDL Format A twisted pair products. Each HA1A receives stereo audio and 24 Vdc power through a rear-panel RJ45 jack fed from a Format-A sender.

The RDL ST-MX3 is a line-level mixer module in the STICK-ON Series of products. It provides audio mixing of three line-level inputs with individual input gain adjustments.

The RDL ST MX2 2 Channel Audio Mixer is used in any application requiring mixing of two audio sources. A mic may be mixed with a line-level music source. Two mics may be mixed to feed the mic or line level input of a power amplifier.

The Bose ControlCenter CV41 converter simplifies wiring when using multiple ControlCenter CC-1 zone controllers with a PS602 or PS604 PowerShare adaptable power amplifier. The CV41 converter supports up to four CC-1 controllers allowing each CC-1 to homerun to the amplifier.

The TOA 9000 series digital mixer/amplifiers consists of two mixer/amplifier models (A-9060D and A-9120D) a mixer-only version, (M-9000) and four accessory modules, for which all models feature eight module ports allowing designers to configure custom systems.