Search results for '%22anchor audio AN-135%2B%22'

The Rolls RM64 four zone mixer combines two paging microphones with up to four line level source inputs. Each input is switch selected to output to any combination of four zone outputs. The outputs are all balanced XLR connectors, and a 1/4" Remote Volume jack provides each zone with the means for external volume control.

Learn More

The Crown 135MA is a high value mixer-amplifier for commercial audio, typical uses are paging, background music and music-on-hold.

Learn More

The Crown 160MA is a high value mixer-amplifier for commercial audio in the Crown Commercial Audio Series of mixer-amplifiers.

Learn More

The Stewart Audio DSP100-2-LZ-D is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-LZ-D supports Dante™ audio.

Learn More

The JBL CSA2120 provides accurate, uncolored sound with low distortion for both audio and voice applications.

Learn More

The Rolls RM69 MixMate 3 mic/source mixer is six channel, single rack space, electronic audio mixer with two microphone inputs and four stereo line inputs. The unit is ideal for installs such as small restaurants or nightclubs where space is a consideration, without compromising audio quality.

Learn More

The Crown XLi Series of power amplifiers represents a new era in affordable, quality power amplification. The XLi 800 is powerful, rugged and reliable. It is suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

Learn More

The Rolls MA1705 5-input 70V mixer amplifier is a single rack space mixer amplifier designed for installation applications. This unit provides a compact and efficient way to mix up to three sources such as AM/FM tuners, CD players and video players with up to two microphones.

Learn More

The Crown XLi Series of power amplifiers represents a new era in affordable, quality power amplification. The XLi 1500 is powerful, rugged and reliable. It is suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

Learn More

The MA2152 is a two rack space mixer amplifier designed for restaurants, churches, clubs etc. The unit provides a compact and efficient way to mix up to three sources such as AM/FM tuners, CD players and video players with up to two microphones. Learn More

The Crown XLi Series of power amplifiers represents a new era in affordable, quality power amplification. The XLi 2500 is powerful, rugged and reliable. It is suited for musicians, DJs, and entertainers as well as houses of worship, discos, and pubs.

Learn More

The Pure Resonance Audio MX8-WP remote wall control panel is a sleek and efficient solution designed exclusively for seamless integration with the MX84 4-zone mixer via RJ45 port. Tailored to provide local audio inputs and effortless control of a single-zone, this audio input wall plate features a user-friendly front panel with a power button, volume control knob, and XLR and RCA inputs. Learn More

The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.

Learn More

This microbrewery sound system is designed for multi-zone background or foreground music in up to four independent areas or zones totaling 8,000 sq. ft. The Pure Resonance Audio RZMA120BT multi-zone Bluetooth mixer has several audio and microphone inputs enabling the user to choose different audio sources and volumes for the different areas as well as paging to any combination of zones if desired.

Learn More

The TOA M-900MK2 Mixer Pre-amplifier is engineered for high performance with wide frequency response, very low noise and distortion, and excellent output regulation.

Learn More

The Ashly Audio SRA-2150 1U power amplifier is an advanced, efficient amplifier that is perfect for installations with modest power requirements. Housed in a compact single rack space chassis and weighing only 10 lbs, and designed to drive 4 or 8 ohm loads. With remote power turn-on/off and adjustable turn-on delay up to eight seconds.

Learn More

M-243 from TOA Electronics is a single rack space six-channel stereo mixer. It features four stereo RCA inputs for sources such as CD players, tape players, or electronic instruments and two XLR microphone inputs with switchable high pass filters. Learn More

The Rolls DB228 Wall Direct Interface is an ideal impedance matching device for connecting any unbalanced stereo signal to a balanced system. Consumer audio equipment such as CD players, DVD players, MP3 players, phone, etc. may be easily connected to a professional audio system.

Learn More

The versatile Atlas Sound TSD-RL21 Two Channel Mixer is ideal for applications where paging, public address, and BGM music is required. Channel one may be configured via rear panel dip switch to accommodate mic or line level while channel two features a stereo summing RCA line level input. Learn More

The Atlas Sound TSD-MIX31RL 3x1 Mic/Line Mixer includes two mic/balanced line inputs via removable Phoenix style connectors and a stereo summing dual RCA input. Switchable phantom power is provided for both mic inputs to facilitate condenser microphones.

Learn More

The JBL Control 2P Compact Powered Reference Monitor System delivers rich, accurate performance for the most demanding audio applications. Learn More

This multi-channel multi-zone commercial background music and paging sound system is designed for background or foreground music in up to four independent zones totaling 8,000 sq. ft. Perfect for a winery, brewery, orchard or cider house, the Pure Resonance Audio RZMA120BT multi-zone Bluetooth mixer has several audio and microphone inputs enabling you to choose different audio sources and volumes for different areas as well as paging to any combination of zones such as the vineyard restaurant, wine tasting rooms, wine bar, outdoor patios and courtyards.

Learn More

Speco Technologies’ UL listed Contractor Series amplifiers can stand on their own to run a smaller installation, or be incorporated into a much larger job. With RMS power ranging from 30W to 120W, microphone and source-mixing ability.

Learn More