Search results for '%22anchor audio AN-135%2B%22'
-
RDL SF-NP50A Network to 50W Mono Audio Amplifier - 70V or 100V Output
The RDL SF-NP50A is an audio power amplifier that converts one Dante network audio channel and one analog input to a 70V or 100V constant voltage amplified output. The output provides 50 watts for a network digital audio level of 0 dBFS. Special software is not required to configure the module.
List $886.26Price $664.70Savings $221.56 (25%) -
Atlas Sound Atmosphere A-XLR Remote XLR Audio Input
The Atlas Sound Atmosphere A-XLR is a remote XLR audio input to an Atmosphere AZM audio processor. This expansion acts identically to the on-board mic/line inputs. The AZM will automatically detect the A-XLR and dynamically assign appropriate audio settings, such as dynamics, EQ, auto gain control, and phantom power, to that input. -
Audio-Technica ATW-1301 Rack-Mount Digital Wireless System
The Audio-Technica System 10 PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space.List $519.99Price $519.00 -
Biamp TesiraFORTE DAN VT4 Digital Audio Server with Dante
The TesiraFORTÉ® DAN VT4 is a digital audio server with 32 bi-directional channels of Dante™ digital audio, 4 analog inputs, 4 channels of Acoustic Echo Cancellation (AEC) technology, and 4 analog outputs.
-
Biamp TesiraFORTE DAN VT Digital Audio Server with Dante
The TesiraFORTÉ® DAN VT is a digital audio server with 32 bi-directional channels of Dante™ digital audio, 12 analog inputs with Acoustic Echo Cancellation (AEC) technology, and 8 analog outputs.
-
Atlas Sound Atmosphere A-BT Remote Bluetooth Wireless Audio Input Receiver with Cat5 Connector
The Atlas Sound Atmosphere A-BT is a remote Bluetooth™ audio input to an Atmosphere AZM audio processor. This wireless expansion remote allows the Bluetooth™ receiver to be optimally placed for wireless coverage. -
Cambridge Qt X 805 8 Zone Sound Masking Generator and Control Module with Pre-Amp Outputs and AVB Media Network
The Cambridge Qt X 805 control module is a sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs allowing for audio distribution from paging controllers and/or (background) music players. -
Cambridge Qt X 805D 8 Zone Sound Masking Generator and Control Module with Pre-Amp Outputs and Dante Media Network
The Cambridge Qt X 805 control module is a sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs allowing for audio distribution from paging controllers and/or (background) music players. -
Allen & Heath AR2412 AudioRack dSNAKE I/O for Expansion
The AR2412 is an audio interface rack for the Allen & Heath GLD and Qu digital mixing systems. -
Cambridge Qt X 800 8 Zone Sound Masking Generator and Control Module with AVB Media Network
The Cambridge Qt X 800 control module is a sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs to allow for distribution of audio from paging controllers and/or (background) music players. -
Cambridge Qt X 800D 8 Zone Sound Masking Generator and Control Module with Dante Media Network
The Cambridge Qt X 800D control module is a sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs to allow for distribution of audio from paging controllers and/or (background) music players. -
Pure Resonance Audio MX8-WP 2-Input Wall Plate with Volume Control for MX84 Zone Mixer
The Pure Resonance Audio MX8-WP remote wall control panel is a sleek and efficient solution designed exclusively for seamless integration with the MX84 4-zone mixer via RJ45 port. Tailored to provide local audio inputs and effortless control of a single-zone, this audio input wall plate features a user-friendly front panel with a power button, volume control knob, and XLR and RCA inputs.Free Shipping!List $71.99Price $59.99Savings $12.00 (17%) -
Attero Tech unDIO2X2+ 2x2 Channel Mic/Line I/O Dante Networked Audio Interface
The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
-
Atlas Sound WTSD-PWHUB WTSD Audio Power and Control Interface
The Atlas Sound WTSD-PWHUB is designed to be used in conjunction with AtlasIED WTSD wall plate mixers at the head-end (amp rack) in place of the WTSD-PWBOB when additional headroom control and external device integration is necessary.
List $153.99Price $123.99Savings $30.00 (19%) -
RDL DB-BT1A Wall-Mounted Bluetooth Audio Format-A Interface
The RDL D SERIES-BT1A modules are Bluetooth audio receiving modules compatible with RDL Format-A twisted pair receivers. When paired with a compatible Bluetooth enabled device, the module receives stereo audio from the Bluetooth source. The stereo signal is sent through two Format-A pairs to any RDL Format-A receiver. A stereo/mono switch set by the installer permits summed mono audio to be sent over one switch-selected pair to the Format-A receiver.
List $515.81Price $386.86Savings $128.95 (25%) -
RDL D-HA1A Format-A Stereo Headphone Amplifier
The D-HA1A is a two pair receiver and audio headphone amplifier compatible with RDL Format A twisted pair products. D-HA1A receiver stereo audio and 24 Vdc power through a rear-panel RJ45 jack fed from a Format-A sender.List $234.30Price $175.72Savings $58.58 (25%) -
Cambridge Qt X 600 6 Zone Sound Masking Generator and Control Module with AVB Media Network
The Cambridge Qt X 600 control module is a 6-zone sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs to allow for distribution of audio from paging controllers and/or (background) music players. -
Cambridge Qt X 600D 6 Zone Sound Masking Generator and Control Module with Dante Media Network
The Cambridge Qt X 600D control module is a 6-zone sound masking generator, controller, third-octave band equalizer and amplifier, with two auxiliary audio inputs to allow for distribution of audio from paging controllers and/or (background) music players. -
Listen Tech LCS-122-01-D Wi-Fi/RF Advanced System (Dante)
The Listen Tech LCS-122-01-D combines Wi-Fi and IR technologies to provide compliant audio coverage PLUS expanded audio coverage to everyone with a Smartphone or tablet. The System comes with Dante multi-channel digital media networking capabilities.
-
Yamaha SWR2100P-5G L2 Network Switch with PoE - 5 Ports
Systems built around the SWR2100P-5G L2 switch allows comprehensive network monitoring from the dedicated Yamaha LAN Monitor software application, with PoE power status monitoring and ON/OFF switching capability.
-
Yamaha SWR2100P-10G L2 Network Switch with PoE - 10 Ports
Systems built around the SWR2100P-10G L2 switch allows comprehensive network monitoring from the dedicated Yamaha LAN Monitor software application, with PoE power status monitoring and ON/OFF switching capability.
-
Bose ControlSpace ESP-1240 Signal Processor (Discontinued)
The Bose® ControlSpace® ESP-1240 engineered sound processor is an open-architecture DSP with 12x4 fixed analog audio, built-in 8-channel ESPLink output and a rear-panel digital expansion slot offering IP-based network audio and control card options.
-
Pure Resonance Audio MX8-PM Push-To-Talk Zone Paging Microphone
The Pure Resonance Audio MX8-PM is a compact 4-zone push-to-talk microphone, perfect for commercial paging. It pairs exclusively with the MX82 and MX84 mixers, offering easy multi-zone paging with features like a high-quality gooseneck condenser microphone, volume control, pre-announcement chime, and more. Ideal for businesses seeking top-notch sound quality for announcements.Free Shipping!List $215.99Price $179.99Savings $36.00 (17%) -
Allen & Heath GR4 Desktop and Rack Mount Installation Zone Audio Mixer
The Allen & Heath GR4 Installation Zone Mixer is a 1U rack-mounting or desktop audio mixer, that includes a mic input on the front panel, plus a 3.5 mm jack on the front for portable music sources.