Search results for 'Audio Enhancement SAFE'

The RDL STP-1 is a pair of convenient attenuator pads that can be located at the precise location that attenuation is needed.

The American Audio WM-219 is a 2-channel UHF wireless microphone system that includes two wireless microphones, two different color-coded rings (to differentiate each microphone) and a wireless receiver with individual volume control and audio input for each microphone.

The RDL ST MX2 2 Channel Audio Mixer is used in any application requiring mixing of two audio sources. A mic may be mixed with a line-level music source. Two mics may be mixed to feed the mic or line level input of a power amplifier.

The Atlas Sound AA-PPRC Priority Paging Remote Controller is a two input by two output speaker level relay switcher. The AA-PPRC is designed to be placed between an amplifier's output and the speaker load. It can be used with 25V, 70.7V, 100V or low impedance systems.

The RDL RU-MLA2 is a dual channel audio preamplifier. The inputs and outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. Each input accepts either a balanced microphone or line level signal. Each output provides either a microphone or line level signal.

The Listen Tech LA-466 Dante 2-channel output XLR adapter lets you drive analog line-level products from any Dante-connected network.

The Atlas Sound TSD-DAC2i is a PoE 2-channel analog pre-amplifier that converts analog audio signals into Dante® digital audio. The TSD-DAC2i can be used for any Analog to Dante® digital audio endpoint but is ideally suited to be used with the Atlas Sound WTSD wall mixer series.

The Stewart Audio DSP 4x4 is a versatile full featured DSP, ideal for small to medium installations where 4 channels are the right amount. It comes with a full array of DSP blocks designed to accept line or mic level (selectable phantom power). The DSP4x4 is designed to optimize the sound quality of multiple zones.

The Whirlwind DA-2 drives multiple isolated line feeds from a single input source. It is ideal for driving lines to multiple amps in live sound applications, distributing audio to multiple tape decks, feeding signals to multiple zoned locations, etc.

The Atlas Sound TSD-BB22 BlueBridge DSP Audio Processor is ideal for system designs that require limited I/O’s, but require a state of the art DSP platform.

The Bosch PRS‑1AIP1 is a universal, IP‑based audio device supporting VoIP and Audio over IP applications. It is an ideal solution for bridging audio and contact closures over long distance LAN and WAN networks, e.g. in shopping malls, tunnels, in and between railway stations.

The Atlas Sound ASP-MG24TDB Masking Processor Speaker Controller With Scheduler Card is great for loudspeaker control functionality and may be configured in 2 input x 4 output mode for stereo full range. Other configurations include full range plus sub operation with Atlas Sound FAP ceiling speakers.

The Rolls PA202 is a compact class D amplifier. It has 20W per channel stereo @ 4 Ohms and 40W when in bridge/mono mode @ 8 Ohms. The class D low heat design gives this amplifier the ability to be mounted in very tight applications.