Search results for '%22anchor audio AN-135%2B%22'
-
Rolls MX34c LiveMix 2-Channel Microphone Mixer
The Rolls MX34c LiveMix two channel microphone mixer. Although having many uses, this little mixer was originally designed with the video camera operator in mind.List $169.00Price $129.00Savings $40.00 (24%) -
Galaxy Audio PA6BT Powered Hot Spot Personal Monitor with Bluetooth
The Galaxy Audio PA6BT is a compact, full-range, powered personal monitor in the Hot Spot line that features Bluetooth technology, its own volume control, a 155-watt NEOLITE 6.5" woofer, and a highly efficient 1.5" 60-watt tweeter.
List $509.99Price $339.99Savings $170.00 (33%) -
Stewart Audio DSP100-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 100W @ 4/8 Ohms Dante Network Enabled
The Stewart Audio DSP100-2-LZ-D is an affordable, 2 channel, 4/8 Ohm, 1/2 rack amplifier delivering 100W per channel with built-in DSP and remote volume control. This amplifier is designed to optimize sound quality for small and medium zones to fit a broad range of applications. The DSP100-2-LZ-D supports Dante™ audio.
-
JBL CSA-2120 2-Channel 120W Audio Amplifier
The JBL CSA2120 provides accurate, uncolored sound with low distortion for both audio and voice applications.
-
Stewart Audio FLX-E-160-2-CV-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 70/100V Dante Network Enabled
The Stewart Audio FLX-E-160-2-CV-D is a 2 channel, 70V/100V, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-CV-D amplifier supports Dante™ audio.
-
Stewart Audio FLX-E-160-2-LZ-D 2-Channel DSP Enabled Amplifier 2 x 160W @ 4/8Ω Dante Network Enabled
The Stewart Audio FLX-E-160-2-LZ-D is a 2 channel, 4/8Ω, 1/2 rack amplifier delivering 160W per channel with built-in DSP, Ethernet control & reporting, secondary RS-232 control, and remote volume control. The FLX-E-160-2-LZ-D amplifier supports Dante™ audio.
-
Attero Tech unDIO2X2+ 2x2 Channel Mic/Line I/O Dante Networked Audio Interface
The Attero Tech unDIO2x2+ I/O interface is a 2in/2out, cost-effective way to add up to two channels (in and out) of Dante audio to any Dante-based networked audio system. The small form factor and PoE power capability make it easy to put Dante connectivity wherever it's needed - near the audio source or sink thereby eliminating costly and interference prone analog wiring.
-
Ashly Audio SRA-2150 1U Rackmount Stereo Power Amplifier 2 Channels 150W/Channel @ 4 ohms
The Ashly Audio SRA-2150 1U power amplifier is an advanced, efficient amplifier that is perfect for installations with modest power requirements. Housed in a compact single rack space chassis and weighing only 10 lbs, and designed to drive 4 or 8 ohm loads. With remote power turn-on/off and adjustable turn-on delay up to eight seconds.
-
Peavey IPR2 5000 Power Amplifier
The Peavey IPR2 5000 is a Power Amplifier designed for years of reliable, flawless operation under rigorous use. Its advanced design allows for it to be lighter in weight while increasing output power, reliability and thermal efficiency. -
Peavey IPR2 7500 Power Amplifier
The Peavey IPR2 7500 is a Power Amplifier designed for years of reliable, flawless operation under rigorous use. Its advanced design allows it to be lighter in weight while increasing output power, reliability and thermal efficiency.
-
Electro-Voice PA2400T 2-Channel Power Amplifier
The audio performance of the Electro-Voice PA2400T Power Amplifier is superior and fulfills the requirements in many demanding long term applications from sound reinforcement, paging or life safety installations. It's high performance torroidal power and output transformers combine clean saturation free audio performance.
-
Atlas Sound TSD-RL21 Two Channel Mixer
The versatile Atlas Sound TSD-RL21 Two Channel Mixer is ideal for applications where paging, public address, and BGM music is required. Channel one may be configured via rear panel dip switch to accommodate mic or line level while channel two features a stereo summing RCA line level input.List $284.99Price $229.99Savings $55.00 (19%) -
Crown XLC2500 2-Channel Power Amplifier
The XLC2500 Power Amplifier is a powerful yet affordable option for both the cinema and install markets. -
Crown XLC 2800 2-Channel Power Amplifier
The Crown XLC 2800 power amplifier is a powerful yet affordable option for both the cinema and install markets. -
Crown XLS 2002 DriveCore 2 Series 2-Channel 375W at 8 Ohm Power Amplifier
The Crown XLS2002 features a sleek look and guarantees a clean, undistorted signal straight to your speakers and delivers a powerful, pure sound experience for any venue. -
Crown XTi 1002 2-Channel Stereo Power Amplifier 2 x 215W @ 8 Ohms
The Crown XTi 1002 is one of the most powerful and innovative amplifiers on the market today with unmatched performance and value, delivering the goods night after night without breaking a sweat.
-
Crown XLS 2502 DriveCore 2 Series 2-Channel 440W at 8 Ohm Power Amplifier
The Crown XLS2502 features a sleek look and guarantees a clean, undistorted signal straight to your speakers and delivers a powerful, pure sound experience for any venue. -
Crown XTi 2002 2-Channel Stereo Power Amplifier 2 x 475W @ 8 Ohms
The Crown XTi 2002 is one of the most powerful and innovative amplifiers on the market today with unmatched performance and value, delivering the goods night after night without breaking a sweat.
-
QSC ISA300Ti 2-Channel Commercial Power Amplifier with 25, 70, 100 Volt Outputs
The QSC ISA300Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA300Ti a rugged, cost-effective power solution for any permanently installed sound system.
-
QSC ISA500Ti 2 Channel Commercial Power Amplifier 25, 70, 100 Volt Outputs
The QSC ISA500Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA500Ti a rugged, cost-effective power solution for any permanently installed sound system.
-
Crown XTi 4002 2-Channel Stereo Power Amplifier 2 x 650W @ 8 Ohms
The Crown XTi 4002 is one of the most powerful and innovative amplifiers on the market today with unmatched performance and value, delivering the goods night after night without breaking a sweat.
-
Crown CDi 1000 Power Amplifier 2-Channel 500W @ 4Ω, 70V/140V Commercial Installation Amplifier
The Crown CDi 1000 is a professional two-channel power amplifier designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70V rms/140V rms outputs with accurate, uncolored sound with very low distortion for the best in music and voice reproduction.
-
QSC ISA800Ti 2 Channel Power Amplifier
The QSC ISA800Ti 2 Channel Power Amplifier is designed to meet the needs of sound system designers and contractors worldwide. Versatile loading options and a comprehensive set of features make the ISA800Ti a rugged, cost-effective power solution for any permanently installed sound system.
-
Crown CDi 2000 Power Amplifier Two-Channel 800 Watts @ 2Ω, 4Ω, 8Ω and 70V/140V Commercial Installation Amplifier
The Crown CDi 2000 power amplifier is a professional tool designed and built for installed sound applications. Extremely versatile; rated for 2Ω, 4Ω, 8Ω loads and 70Vrms/140Vrms outputs. The Crown CDi series amplifiers include four models which are identical except for output power: CDi 1000, CDi 2000, CDi 4000, and CDi 6000.