- Description
Details
Williams Sound DL210 NET 2.0 Digi-Loop DSP Dual Channel Loop Amplifier
Digi-Loop is definitely state-of-the-art – the first of its kind to maximize modern amplifier technology. Its network-control capability provides seamless, remote system set-up, operation, and monitoring via laptop or tablet. DSP audio processing offers flexible, powerful software control of mixing, equalization, compression and more. Powerful Class D, pulse-width amplifiers maximize efficiency.
The Digi-Loop's amplifier design offers dual 12 A rms loop outputs for perimeter loop(s), single array(s), dual loop, or phased-array configuration. A 70-100 V input provides connection to a distributed speaker/paging system, ensuring announcements are heard by loop users.
- Features
Features
- Network control - allows control and calibration of unit remotely with application software
- High continuous current 12 Arms (17 Apk) per output continuous
- LCD Screen with VU metering, easy one-button menu control
- DSP Audio Processing
- USB for firmware updates
- Input mixing, parametric equalization, compression, metal compensation, high and low-pass filters, AGC and audio delay
- Power-save mode
- Adjustable output delay for multiple amps in large venues
- Fault warning and active protection against shorted or open circuits and overheating
- Loop fault relay output
- XLR and 3-position terminal block input configurable as microphone input or line-input, balanced or unbalanced
- Standard 2 RU, 19" rackmount
- Magnetic signal couples directly to devices equipped with telecoils (T-coils) such as hearing aids, cochlear implants, or optional loop receivers
- Suitable for phased-array or dual-loop systems
- Phased-array mode automatically produces 90° phase shift in slave loop output
- Meets IEC Specification 60118-4 (when designed and commissioned properly)
- Tested to IEC Specifications 62489-1 Benchmark Standards
- Meets ADA / ADAAG guidelines
- Specification
Color Case: Black, white and blue legends on front, white legends on backLCD: Backlit Blue Fan Cooling Variable Speed, Temperature Controlled Power Supply Internal, Universal 100 - 240 VAC, 50/60 Hz, 250WFuse: 5 x 20 mm, 5 A, 250VAC power plug is IEC 320-C14 Heat Output @ 120 VAC Sleep state: 100 BTU/hrIdle state: 146 BTU/hr; Driving two loops @ 12 A each: 1,040 BTU/hr Ethernet (1x) RJ-4510 - 100 MBps USB (1x) standard-BUSB 1.1, 2.0 or 3.0 supported RS-232/Loop Fault Relay (1x) DB-9 jackRS-232: Pin 2=Tx, Pin 3=Rx, Pin 5=gndLoop fault relay: Pin 1=NC, Pin 4=Common, Pin 6=NORelay contact rating: 2.0 A @ 30 VDC Environment 0 - 35° C ( 32 - 95° F), 0 - 90% relative humidity Coverage Area 31,400 sq. ft. (2,917 sq. m.) (Perimeter Loop, 1:1 aspect ratio, both outputs driven)51,660 sq. ft. (4,800 sq. m.) (Perimeter Loop, 3:1 aspect ratio, both outputs driven) Mic/Line Inputs (2x) 3-position terminal block, input impedance=1.5 kΩ Mic, 10 kΩ LineConfigurable/Accepts: Mic, Line -10 dBV, Line +4 dBu, or Line +8 dBu, balanced or unbalancedPhantom supply (48V) 70 - 100V Input (1x) 2-position terminal blockHigh/speaker-level input (accepts 25 V, 70 V or 100 V) from distributed audio/paging systems Line Outputs (1x) 3-position terminal blockLoop-through of Mic/Line Input 1 & Line Input 2, +4 dBu, Balanced or UnbalancedThe line outputs mirror the audio of the loop output Loop Output(s) (1x) 2-position terminal block per output Audio Output Delay Adjustable from 0 to 165 msec Headphone Output (1x) 1/4" stereo headphone jack, on front of unitMonitored input or output selectable in menu Loop Fault Relay Integrated into RS-232 DB-9 jackPin 1=NC, Pin 4=Common and Pin 6=NOContact rating: 2.0 A @ 30 VDC Loop Output Drive Voltage 33.3 Vrms (47.1 Vpk) continuous Rated Loop Output Current 12 Arms (17 Apk) per output Loop Resistance Range 0.5 Ω to 3.0 Ω (DC) Speaker Output Integrated into Loop Output A terminal block (switchable in menu)225W x 1 channel @ 4Ω, 125W x 1 channel @ 8Ω, (Class D)Frequency response = 20 Hz-20 kHz, THD=0.07% Rated Load 0.5 Ω DC with 135 µH inductance Loop Frequency Response 45 Hz to 9.0 kHz ± 2 dB (1 kHz ref.) Rated Loop THD <1 % at rated output current (1 kHz sine wave) Dimensions (H x W x D) 3.5" (88.9 mm) x 19" (482.6 mm) x 12" (304.8 mm) Weight 14.3 lbs (6.5 kg) - Documents
Documents
- In The Box
In The Box
- (1) DL 210 NET 2.0 DSP Induction Loop Amplifier
- (1) WLC 004 Line Cord (US)
- (1) IDP 009 ADA Wall Plaque (T-Coil)
- Reviews
Write Your Own Review